jomarxBlog

MOSFET installation on a version 3 gearbox (Steyr AUG)

Jomar Maquinay · Jan 28, 2021

Installing a MOSFET on a Steyr AUG is quite easy, because only two screws stand between you and the gearbox. The video above is a step-by-step install of a BoA-Cheetah MOSFET on a version 3 gearbox.

It also compares the rate of fire before and after: from the MOSFET, and from replacing the stock Tokyo Marui wiring with silver-coated wire.

Too long, didn't watch: the MOSFET gained 3 rounds per second, from 34 rps to 37 rps. The battery was not even fully charged yet, so it should be a little higher.

What a MOSFET does

An AEG's trigger is a mechanical switch carrying the full motor current, and its contacts burn with use. A MOSFET takes that load off it: the trigger only signals the MOSFET, and the MOSFET switches the motor. See two MOSFETs for an airsoft AEG for the specs of the BoA-SMD and BoA-Phanter.

Related